网站首页 说明书大全 范文大全 知识大全 实用查询
首页 > 知识大全 > 电脑知识 >

怎么制作系统文件(linux制作根文件系统的必要步骤)

一、根文件系统预备知识

  • 嵌入式Linux中都需要构建根文件系统,构建根文件系统的规则在FHS(Filesystem Hierarchy Standard)文档中,下面是根文件系统顶层目录。

目录 内容

bin 存放所有用户都可以使用的、基本的命令。

sbin 存放的是基本的系统命令,它们用于启动系统、修复系统等。

usr 里面存放的是共享、只读的程序和数据。

proc 这是个空目录,常作为proc文件系统的挂载点。

dev 该目录存放设备文件和其它特殊文件。

etc 存放系统配置文件,包括启动文件。

lib 存放共享库和可加载块(即驱动程序),共享库用于启动系统、运行根文件系统中的可执行程序。

boot 引导加载程序使用的静态文件

home 用户主目录,包括供服务账号锁使用的主目录,如FTP

mnt 用于临时挂接某个文件系统的挂接点,通常是空目录。也可以在里面创建空的子目录。

opt 给主机额外安装软件所摆放的目录。

root root用户的主目录

tmp 存放临时文件,通常是空目录。

var 存放可变的数据。

1、建立根文件系统目录

  • 进 入到/opt/studyarm目录,新建建立根文件系统目录的脚本文件create_rootfs_bash,使用命令chmod +x create_rootfs_bash改变文件的可执行权限,./create_rootfs_bash运行脚本,就完成了根文件系统目录的创建。
#!/bin/shecho "------Create rootfs directons start...--------"mkdir rootfscd rootfsecho "--------Create root,dev....----------"mkdir root dev etc boot tmp var sys proc lib mnt homemkdir etc/init.d etc/rc.d etc/sysconfigmkdir usr/sbin usr/bin usr/lib usr/modulesecho "make node in dev/console dev/null"mknod -m 600 dev/console c 5 1mknod -m 600 dev/null    c 1 3 mkdir mnt/etc mnt/jffs2 mnt/yaffs mnt/data mnt/tempmkdir var/lib var/lock var/run var/tmpchmod 1777 tmpchmod 1777 var/tmpecho "-------make direction done---------"
  • 改变了tmp目录的使用权,让它开启 sticky位,为tmp目录的使用权开启此位,可确保tmp目录底下建立的文件,只有建立它的用户有权删除。尽管嵌入式系统多半是单用户,不过有些嵌入 式应用不一定用root的权限来执行,因此需要遵照根文件系统权限位的基本规定来设计。

2、建立动态链接库

  • 动态链接库直接用友善之臂的,先解压友善之臂的根文件包,拷贝lib的内容到新建的根文件目录lib内。
cd /mnt/hgfs/sharetar –zxvf root_qtopia.tgz –C /opt/studyarmcp –rfd /opt/studyarm/root_qtopia/lib/* /opt/studyarm/rootfs/lib/*

3、交叉编译Bosybox

  • Bosybox是一个遵循GPL v2协议的开源项目,它在编写过程总对文件大小进行优化,并考虑了系统资源有限(比如内存等)的情况,使用Busybox可以自动生成根文件系统所需的bin、sbin、usr目录和linuxrc文件。

1、解压busybox

cd /mnt/hgfs/sharetar –zxvf busybox-1.13.3.tar.tgz –C /opt/studyarm
  • 2、进入源码,修改Makefile文件:
cd /opt/studyarm/busybox-1.13.3
  • 修改:
CROSS_COMPILE ?=arm-linux-   //第164行ARCH ?=arm //第189行

更多linux内核视频教程文档资料免费领取后台私信【内核】自行获取.

怎么制作系统文件(linux制作根文件系统的必要步骤)(1)

Linux内核源码/内存调优/文件系统/进程管理/设备驱动/网络协议栈-学习视频教程-腾讯课堂

4、配置busybox

  • 输入make menuconfig进行配置

(1)、Busybox Settings---> General Configuration--->

[*] Show verbose applet usage messages[*] Store applet usage messages in compressed form[*] Support –install [-s] to install applet links at runtime[*] Enable locale support(system needs locale for this to work)[*] Support for –long-options[*] Use the devpts filesystem for unix98 PTYs[*] Support writing pidfiles[*] Runtime SUID/SGID configuration via /etc/busybox.config[*]  Suppress warning message if /etc/busybox.conf is not readableBuild Options--->     [*] Build BusyBox as a static binary(no shared libs)[*] Build with Large File Support(for accessing files>2GB)Installation Options->[]Don’t use /usrApplets links (as soft-links) --->(./_install) BusyBox installation prefixBusybox Library Tuning --->(6)Minimum password legth(2)MD5:Trade Bytes for Speed[*]Fsater /proc scanning code(+100bytes)[*]Command line editing(1024)Maximum length of input[*] vi-style line editing commands(15) History size[*] History saving[*] Tab completion[*]Fancy shell prompts(4) Copy buffer size ,in kilobytes[*]Use ioctl names rather than hex values in error messages[*]Support infiniband HW

(2)、Linux Module Utilities---> (/lib/modules)Default directory containing modules (modules.dep)Default name of modules.dep

[*] insmod[*] rmmod[*] lsmod[*] modprobe-----options common to multiple modutils[ ] support version 2.2/2.4 Linux kernels[*]Support tainted module checking with new kernels[*]Support for module .aliases file[*] support for modules.symbols file

(3)、在busybox中配置对dev下设备类型的支持

  • dev的创建有三种方法:
  • 手动创建:在制作根文件系统的时候,就在dev目录下创建好要使用的设备文件,系统挂接根文件系统后,就可以使用dev目录下的设备文件了。
  • 使用devfs文件系统:这种方法已经过时,具有不确定的设备映射、没有足够的主/次设备号、devfs消耗大量的内存。
  • udev:它是个用户程序,能根据系统中硬件设备的状态动态的更新设备文件,包括设备文件的创建、删除等。它的操作相对复杂,但灵活性很高
  • mdev 是busybox自带的一个简化版的udev,适合于嵌入式的应用埸合。其具有使用简单的特点。它的作用,就是在系统启动和热插拔或动态加载驱动程序时, 自动产生驱动程序所需的节点文件。在以busybox为基础构建嵌入式linux的根文件系统时,使用它是最优的选择。下面的选项将增加对mdev的支持。
Linux System Utilities  --->                   [*]Support /etc/mdev.conf             [*]Support command execution at device addition/removal

5、编译busybox

编译busybox到指定目录: cd /opt/studyarm/busybox-1.13.3 make CONFIG_PREFIX=/opt/studyarm/rootfs install 在rootfs目录下会生成目录bin、sbin、usr和文件linuxrc的内容。

  • 建立etc目录下的配置文件
  1. etc/mdev.conf文件,内容为空。
  2. 拷贝主机etc目录下的passwd、group、shadow文件到rootfs/etc目录下。
  3. etc/sysconfig目录下新建文件HOSTNAME,内容为”MrFeng”。
  4. etc/inittab文件:
#etc/inittab::sysinit:/etc/init.d/rcS::askfirst:-/bin/sh::ctrlaltdel:/sbin/reboot::shutdown:/bin/umount -a –r

6、etc/init.d/rcS文件:

#!/bin/shPATH=/sbin:/bin:/usr/sbin:/usr/binrunlevel=Sprevlevel=Numask 022export PATH runlevel prevlevelecho "----------munt all----------------"mount -aecho /sbin/mdev>/proc/sys/kernel/hotplugmdev -secho "***********************************************"echo "****************Studying ARM*********************"echo "Kernel version:linux-2.6.29.1"echo "Student:Feng dong rui"echo "Date:2009.07.15"echo "***********************************************"/bin/hostname -F /etc/sysconfig/HOSTNAME
  • 使用以下命令改变rcS的执行权限:
Chmod +x rcS

7、etc/fstab文件:

#device    mount-point     type     option     dump   fsck   orderproc          /proc        proc     defaults    0        0none          /tmp        ramfs    defaults    0        0sysfs         /sys          sysfs    defaults    0        0mdev          /dev        ramfs    defaults    0        0

8、etc/profile文件:

#Ash profile#vim:syntax=sh#No core file by defaults#ulimit -S -c 0>/dev/null 2>&1USER="id -un"LOGNAME=$USERPS1='[u@h=W]#'PATH=$PATHHOSTNAME='/bin/hostname'export USER LOGNAME PS1 PATH
  • 制作根文件系统映像文件
  • 使用以下命令安装好yaffs文件系统制作工具:
cd /mnt/hgfs/sharetar –zxvf mkyaffs2image.tgz –C /
  • 在/opt/studyarm目录下,使用命令mkyaffs2image rootfs rootfs.img生成根文件系统映像文件。

二、启动系统

  • 将前面两章生成的内核映像文件和根文件系统映像文件下载到mini2440开发板,查看启动信息。我成功移植启动信息如下:
VIVI version 0.1.4 (root@capcross) (gcc version 2.95.3 20010315 (release)) #0.1.4 Mon Oct 27 10:18:15 CST 2008MMU table base address = 0x33DFC000Succeed memory mapping.DIVN_UPLL0MPLLVal [M:7fh,P:2h,S:1h]CLKDIVN:5h+---------------------------------------------+| S3C2440A USB Downloader ver R0.03 2004 Jan  |+---------------------------------------------+USB: IN_ENDPOINT:1 OUT_ENDPOINT:3FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>NOTE: Power off/on or press the reset button for 1 sec      in order to get a valid USB device address.NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)Found saved vivi parameters.Press Return to start the LINUX/Wince now, any other key for viviCopy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... donezImage magic = 0x016f2818Setup linux parameters at 0x30000100linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0"MACH_TYPE = 362NOW, Booting Linux......Uncompressing Linux.......................................................................................................................... done, booting the kernel.Linux version 2.6.29.1 (root@localhost.localdomain) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #8 Sat Jul 18 10:37:22 CST 2009CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177CPU: VIVT data cache, VIVT instruction cacheMachine: Study-S3C2440ATAG_INITRD is deprecated; please update your bootloader.Memory policy: ECC disabled, Data cache writebackCPU S3C2440A (id 0x32440001)S3C24XX Clocks, (c) 2004 Simtec ElectronicsS3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHzCLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL onBuilt 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0irq: clearing pending status 02000000irq: clearing subpending status 00000002PID hash table entries: 256 (order: 8, 1024 bytes)Console: colour dummy device 80x30console [ttySAC0] enabledDentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Memory: 64MB = 64MB totalMemory: 60876KB available (3536K code, 293K data, 136K init)Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)Mount-cache hash table entries: 512CPU: Testing write buffer coherency: oknet_namespace: 296 bytesNET: Registered protocol family 16S3C2410 Power Management, (c) 2004 Simtec ElectronicsS3C2440: Initialising architectureS3C2440: IRQ SupportS3C24XX DMA Driver, (c) 2003-2004,2006 Simtec ElectronicsDMA channel 0 at c4808000, irq 33DMA channel 1 at c4808040, irq 34DMA channel 2 at c4808080, irq 35DMA channel 3 at c48080c0, irq 36S3C244X: Clock Support, DVS offbio: create slab <bio-0> at 0SCSI subsystem initializedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbNET: Registered protocol family 2IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 2048 (order: 2, 16384 bytes)TCP bind hash table entries: 2048 (order: 1, 8192 bytes)TCP: Hash tables configured (established 2048 bind 2048)TCP reno registeredNET: Registered protocol family 1NTFS driver 2.1.29 [Flags: R/O].yaffs Jul 18 2009 10:31:41 Installing. msgmni has been set to 119io scheduler noop registeredio scheduler anticipatory registered (default)io scheduler deadline registeredio scheduler cfq registeredConsole: switching to colour frame buffer device 30x40fb0: s3c2410fb frame buffer devicelp: driver loaded but no devices foundppdev: user-space parallel port driverSerial: 8250/16550 driver, 4 ports, IRQ sharing enableds3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440brd: module loadedloop: module loadeddm9000 Ethernet Driver, V1.31Uniform Multi-Platform E-IDE driveride-gd driver 1.18ide-cd driver 5.00Driver 'sd' needs updating - please use bus_type methodsS3C24XX NAND Driver, (c) 2004 Simtec Electronicss3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9nsNAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)Scanning device for bad blocksCreating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit":0x000000000000-0x000000030000 : "boot"0x000000050000-0x000000250000 : "kernel"0x000000250000-0x000003ffc000 : "kernel"usbmon: debugfs is not availableohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Drivers3c2410-ohci s3c2410-ohci: S3C24XX OHCIs3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000usb usb1: New USB device found, idVendor=1d6b, idProduct=0001usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: S3C24XX OHCIusb usb1: Manufacturer: Linux 2.6.29.1 ohci_hcdusb usb1: SerialNumber: s3c24xxusb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedusbcore: registered new interface driver libusualusbcore: registered new interface driver usbserialUSB Serial support registered for genericusbcore: registered new interface driver usbserial_genericusbserial: USB Serial Driver coreUSB Serial support registered for FTDI USB Serial Deviceusbcore: registered new interface driver ftdi_sioftdi_sio: v1.4.3:USB FTDI Serial Converters DriverUSB Serial support registered for pl2303usbcore: registered new interface driver pl2303pl2303: Prolific PL2303 USB to serial adaptor drivers3c2410_udc: debugfs dir creation failed -19mice: PS/2 mouse device common for all micei2c /dev entries drivers3c2440-i2c s3c2440-i2c: slave address 0x10s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHzs3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapterS3C2410 Watchdog Timer, (c) 2004 Simtec Electronicss3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabledTCP cubic registeredRPC: Registered udp transport module.RPC: Registered tcp transport module.yaffs: dev is 32505858 name is "mtdblock2"yaffs: passed flags ""yaffs: Attempting MTD mount on 31.2, "mtdblock2"yaffs_read_super: isCheckpointed 0VFS: Mounted root (yaffs filesystem) on device 31:2.Freeing init memory: 136K----------munt all----------------***********************************************Kernel version:linux-2.6.29.1USER:BaozhongchaoDate:2009.07.15***********************************************Please press Enter to activate this console. [@MrFeng=W]#lsbin         etc         linuxrc     proc        sys         varboot        home        lost+found  root        tmp         wwwdev         lib         mnt         sbin        usr[@MrFeng=W]#
  • 基于S3C2440的Linux内核移植和yaffs2文件系统制作.pdfourdev_464685.rar(文件大小:64K) (原文件名:基于S3C2440的Linux内核移植和yaffs2文件系统制作.rar)

相关文章